DHW tanks
" Norwian MWT-C"

Norwian air-to-water heat pump combined with a Norwian water heater consumes significantly less energy than a conventional electric water heater.

Norwian MWT-C hot water tanks

You can choose water heater according to the domestic hot water needs – from 100 to 300 liters capacity. Designed for use in heat pump systems – features a large heat exchanger (up to 3 m2). The drinking water tank is made of stainless steel. This prevents corrosion and keeps the hot water clean for a long time.
Norwian MWT 200 C išvaizda
Norwian MWT 200 C biolerio vaizdas iš šono

*

Thermal insulation

-is an essential factor that ensures heat retention and energy efficiency.

All Norwian hot water heaters, regardless of the model, are externally covered with 50 mm  PPU (solid polyurethane) closed-cell foam insulation .

For additional protection of the thermal insulation against physical damage and for the aesthetic appearance of the boiler, an outer shell of galvanized tin is installed. 

legionelezes prevencija

*

Safety

Hygiene standards  regarding the safe supply of drinking water establish that for the prevention of legionellosis, the water temperature in the building’s hot water system should be 50-60 °C, if necessary, it must be possible to increase the hot water temperature in the water heater to 66 °C at any time. Norwian heat pumps prepare hot water up to 75 °C. and the electric heater* installed in the boiler allows you to adjust the hot water temperature immediately if needed.
* included in the standard set of MWT-200 and MWT-300, ordered additionally for other models.  

*

Durability

Norwegian DHW heaters are manufactured to the highest quality standards and using durable materials such as stainless steel.
*Many households and businesses use drinking water softening systems. The softener uses salts that bacteria love (in themselves harmless to humans). Enamelled heaters use soluble magnesium anodes to protect them from corrosion. Since magnesium corrodes faster than steel, magnesium anodes take over the corrosion process, thus protecting the boiler. Doing this work causes the magnesium anodes to dissolve over time. When dissolving, the anode causes a side effect – it releases a small amount of hydrogen from the water. Which is converted into hydrogen sulfide gas by the aforementioned sulfur bacteria. The internal tanks and heat exchangers of Norwian water heaters are made of stainless steel. Therefore, magnesium anodes are unnecessary and the possibility of bad odors is completely eliminated.

Technical data

Norwian hot water heaters designed for heat pumps.

Model

MWT-200/C

MWT-300/C

Nominal capacity

Liters

200

300

Casing(outer)

Material

Galvanized steel

Galvanized steel

Color

White

White

Diameter

mm

Ø520

Ø600

Height

mm

1572

1872

Insulation foam

Material

Polyurethane

Polyurethane

Thickness

mm

50

50

DHW tank

Material

Duplex Inox

Duplex Inox

Wall Thickness

mm

1.2

1.5

Diameter

mm

Ø420

Ø500

Šilumokaitis (HX)

Type

Corrugated

Corrugated

Medžiaga (Nerūdijantis plienas)

Stainless Steel SUS 304

Stainless Steel SUS 304

Diameter

mm

Ø25

Ø25

Area

m2

2

3

Connection

Inch

G1″-F

G1″-F

Lenght

m

20

30

Connections

Air vent

B

G1/2″-F

G3/4″-F

T/P valve

A

G3/4″-F

G3/4″-F

Electric heater

K

G1-1/2″-F

G1-1/2″-F

Drainage

L

G 1/2″-F

G 1/2″-F

Hot water outlet

C

G1″-F

G1″-F

Cold water outlet

H

G1″-F

G1″-F

Hot water cycling

N/A

N/A

Magnesium anode

N/A

N/A

Sensor

E

G 1/2″-F

G 1/2″-F

Heat Exchanger(HX) Coil in

D

G 1″-F

G 1″-F

 Heat Exchanger(HX) Coil out

G

G 1″-F

G 1″-F

Accessories

Plastic feet

qty

3

3

Sensor sleeve

qty

1

1

Electric heater

qty

ordered additionally

Technical data

NORWIAN MWT series boiler installation diagrams

Side view

Boilerio Norwian pjuvis

Top view

Norwian Boilerio brezinys

Dimensions

Subscribe to NORWIAN news

Subscribe to our newsletter to be the first to know about new models and software updates. You will receive notifications about applicable discounts and promotions.